Welcome to Dongguan Ruikun Material Technology Co.,Ltd.

替换城市 Principle and influencing factors of special ink defoamer agents for paints(2)

2023-04-30

stabilizer

Good paint defoamers not only have a good defoaming effect in paint systems, but also maintain defoaming ability at room temperature and under heating environments. In addition, it cannot be compatible with foam system. If the compatibility is good, it will help to produce foam. While the paint ink defoamer has good dispersibility in the foaming system, specifically refers to the uniform and smooth diffusion of the defoamer on the surface, which can cover the foam to achieve the elimination effect. Its working principle is to reduce the surface tension of the liquid around the foam, so that small foam can gather into large foam, and finally foam will burst.

viscosity-reducing

wetting

conductive

Influencing factors of special defoaming agents for paints:

surface tension

feeling

A substance that can reduce the surface tension of water, solution, suspension, etc., prevent the formation of foam, or reduce or eliminate the original foam. [1]
Defoaming agents should have the following properties: ① strong defoaming power and low dosage; ② Adding to the foaming system does not affect the basic properties of the system, i.e. does not react with the defoaming system; ③ Low surface tension; ④ Good balance with the surface; ⑤ Good heat resistance; ⑥ Good diffusion and permeability, high positive spreading coefficient; ⑦ Chemical stability, strong oxidation resistance; ⑧ Good gas solubility and permeability; ⑨ Low solubility in foaming solutions; ⑩ No physiological activity, high safety

替换城市  The level of coating surface tension has a significant impact on defoaming agents. The surface tension of defoaming agents is lower than that of coatings, otherwise they cannot have defoaming and antifoaming effects. The surface tension of a coating is a variable factor, so when selecting defoamers, it is necessary to maintain a constant surface tension, taking into account the surface tension variation factor.

Defoaming agents are widely used in food industry, paper industry, water treatment, oil extraction industry, printing and dyeing industry, coating industry, detergent industry, rubber latex industry, aerosol industry, daily chemical industry, pharmaceutical industry, dairy industry, etc. [2]

not

not

Effects of other additives

Most surfactants used in coatings tend to be functionally incompatible with ink defoamer. In particular, emulsifiers, wetting and dispersing agents, leveling agents, thickeners, etc. can have an impact on the effectiveness of defoamers. Therefore, when coordinating various additives, it is necessary to pay attention to the relationship between different additives and select a good balance point.